PAG RAPID COUPLING

WHERE TO USE WHICH COUPLING?

PAG RAPID INOX COUPLING

These couplings are especially suggested for the installations near the sea water where humidity is high and underground wastewater pipelines where the pipes have a direct contact with the land. When KML pipes are to be used, PAG RAPID INOX couplings must definitely be used for connection.

PAG RECORD PRESSURE COUPLING

PAG RAPID COUPLINGS have a pressure resistance up to 0,5bar. (0,3 bar in DN250 and DN300) Axial load above this is obtained through additional protection of PAG RECORD pressure couplings or PAG RECORD COMBI pressure couplings. In this way, a pressure resistance up to 10 bar is obtained between DN50- DN100. (Please see the Table).

Under which conditions PAG PRESSURE COUPLINGS must be used?

Available for use in pipelines in accumulation areas.-Available for use at the points where the rainwater pipelines produce excessive loads.-Pressure couplings must definitely be used in the lines that pass through several ground floors without taking any branch duct.Available for use with the pipelines, which are fed with wastewater pumps and where the pressure is high.-It is not required to take any measures up to DN150 in wastewater pipes until 0,5 bar. However, pressure couplings must be definitely used at BENDing points in DN200 lines, included in high building category.-Wastewater pipelines attached to mixed water sewage lines must be strictly reinforced with PAG RECORD Pressure Coupling.-Available for use in wastewater pipelines installed under underground water level.

If a pressure amount above 0,5 bar is expected from the pipeline, it is enough to use pressure coupling only at turns (roundups) at elbowing points. You must strictly use PAG RECORD Pressure Coupling if a pressure amount above 0,5 bar is expected.

Axial pressure safety couplings used especially in wastewater and rainwater lines.
While used with rapid coupling in terms of their design,they can also be used with CV type couplings.

PAG COMBI PRESSURE COUPLINGS

Axial pressure safety couplings used especially in wastewater and rainwater lines. While used with rapid coupling in terms of their design,they can also be used with CV type couplings.

PAG UNIVERSAL PRESSURE COUPLING

Just as they can be used with rapid coupling, they can also be used with CV couplings.They are recommended to be used when it is required to resist to high loads.